1. Close all doors.
  2. Press and hold the Unlock button on door lock switch on drivers door.
    Hold until instructed to release.
  3. Insert and remove key from ignition 2 times. Do Not turn ignition.
  4. Insert key in ignition a third time and leave key in ignition. Do Not turn ignition.
  5. Release door lock switch on drivers door panel.
    A Chime will sound 3 times indicating that you are in programming mode.
  6. Press both the Lock and Unlock buttons on the remote up to 30 seconds.
    A chime will sound 2 times if remote has programmed successful.
  7. Repeat step 6 if you are programming additional remotes.
  8. Remove key from ignition to exit programming mode.