02-07 Acura RSX Key and Remote Programming
Program only if remote transmitter added or replaced or if system malfunction
- Obtain all remote transmittersNOTE: A maximum of 3 remote transmitters can be programmed
- Switch ignition ON
- Proceed as follows:NOTE: Point remote transmitter at central locking signal control moduleNOTE: Central looking signal control module located in master window switch on driver’s door
- Within 4 seconds: Press LOCK button [1] or UNLOCK button [2] of first remote transmitter
- Within 4 seconds: Switch ignition OFF
- Within 3 seconds: Switch ignition ON
- Repeat procedure above twice
- Within 4 seconds: Press LOCK button [1] or UNLOCK button [2] of first remote transmitter.
- System should now lock and unlock vehicle to indicate programming mode activated
- Within 10 seconds:
- Press LOCK button [1] or UNLOCK button [2] of first remote transmitter, allowing doors to lock and unlock once
- Press LOCK button [1] or UNLOCK button [2] of each remaining remote transmitter to be programmed, allowing doors to lock and unlock once as each remote transmitter is programmed
- Switch ignition OFF
- Remove key
- Check operation of all programmed remote transmitters