1- Driveres door open & unlocked. Key out of ignition
2- Insert & remove key 2 times within 5 seconds
3- Close & open drivers door twice within 40 seconds
4- Insert key into ignition & remove
5- Close & open drivers door twice within 40 seconds
6- Insert key into ignition
7- Close the door
8- Turn ignition switch from “LOCK” to “ON” & back to “LOCK”
– ONCE for ADD mode
– TWICE for REWRITE mode
9- Remove the key from ignition
10- To confirm your mode selection, the power locks will now cycle “lock” to
“unlock” a number of times corresponding to your key cycles in step 8
11- Within 40 seconds of confirmation
– Press both transmitter Lock & Ulock buttons simultaneously
– Within 3 seconds press transmitter Lock button for more than 1 second
– If successful, the power locks will cycle once (twice indicates
transmitter problems)
– Repeat step 11 for additional remotes
12- Open door to exit programing
