06-10 Toyota Yaris Remote Programming Instructions

  • Driver’s door open, key removed from ignition switch
  • Within 5 seconds: Insert and remove the key from the ignition switch twice
  • Within 40 seconds: Close and open driver’s door twice. Insert and remove the key from the ignition switch
  • Within 40 seconds: Close and open driver’s door twice. Insert the key into the ignition switch and close the driver’s door
  • within 40 seconds: Switch ignition ON and OFF once to program a key remote transmitter code whilst retaining the original codes or twice to program a key remote transmitter code whilst erasing the original codes. Three times st o check how many key remote transmitters are currently registered or five times to erase all registered codes
  • Remove the key from ignition switch. System should now lock and unlock vehicle once, twice or five times depending which mode has been selected. One to four times, slowly, to indicate number of remote transmitters registered
  • Within 45 seconds. Press and hold LOCK and UNLOCK button simultaneously for 1.5 seconds
  • Within 3 seconds: Pres and release LOCK or UNLOCK button
  • System should now lock and unlock vehicle once to confirm registration, twice to indicate registration has failed
  • Within 45 seconds: Repeat button procedure to program remaining remote transmitters
  • NOTE: To exit programming mode: Open driver’s door
  • NOTE: A maximum of 4 key remote transmitter can be programmed.