08-14 Toyota Sequoia Remote Fob Programming
Program remote transmitter when added, replaced or because of a system malfunction
- Driver’s door open, key removed from ignition switch
- Within 5 seconds: Insert and remove the key from the ignition twice
- Within 40 seconds: Close and open driver’s door twice
- Insert and remove the key from the ignition switch. Close and open driver’s door twice
- Insert the key into the ignition switch and close the driver’s door
- Within 40 seconds
- Switch ignition ON and OFF once to program a remote transmitter code whilst retaining the original codes or twice to program a remote transmitter code whilst erasing the original codes. Three times to check how many remote transmitters are currently registered or fie items to erase all registered codes
- Remove key from ignition switch: System should now lock and unlock vehicle once, twice or five times depending which mode has been selected. One to four times slowly, to indicate number of remote transmitters registered
- Within 40 seconds: Press and hold LOCK and UNLOCK buttons simultaneously for 1.5 seconds
- Within 3 seconds: Press LOCK button
- System should now lock and unlock vehicle once to confirm registration twice to indicate registration has failed
- Within 40 seconds: Repeat button procedure to program remaining remote transmitters
- NOTE: to exit programming mode: Open driver’s door
- NOTE: A maximum of 4 remote transmitters can be programmed
