09-14 Toyota Matrix Remote Transmitter Instructions
Program remote when transmitter added, replaced or system malfunction.
- Deriver’s door open, all others doors closed, key transmitter removed from ignition switch
- Within 5 seconds: Insert and remove the key transmitter from the ignition switch twice
- Within 40 seconds: Close and open driver’s door twice. Insert and remove the key transmitter from the ignition switch
- Within 40 seconds: Close and open deriver’s door twice. Insert the key transmitter into the ignition switch and close the deriver’s door
- Within 40 seconds: Switch ignition ON and OFF once to programm a key transmitter code whilst retaining the original codes or twice to program a key transmitter code whilst erasing the original codes. Three times to check how many key transmitters are currently registered or five times to erase all registered codes. Remove key transmitter from ignition switch
- Within 45 seconds: System should now lock and unlock vehicle once, twice or five times depending which mode has been selected, or one to four times slowly to indicate number of key transmitters registered
- If programming mode selected: Press and release LOCK and UNLOCK buttons simultaneously. Press LOCK and UNLOCK button
- System should now lock and unlock vehicle once to confirm registration or twice to indicate registration has failed
- Within 40 seconds: Repeat button procedure to program remaining key transmitters
- NOTE: TO exit programming mode: Open driver’s door. Also note that a maximum of 4 key transmitters can be programmed