1. Remove key from ignition switch.
2. Remove the MALL PGM fuse, from fuse box

3. Close all doors.




4. Turn ignition switch to ACC.

5. Within 1 second turn the ignition switch to OFF then back to ACC

6. Open and close drivers door.

7. A chime will sound indicating you are in programming mode.

8. Press and hold the LOCK and UNLOCK buttons together until chime sounds twice,
about 14 seconds.

9. Repeat step 8 for any additional remotes.

10. Remove key from ignition and replace MALL PGM fuse.

11. Test remotes.