05-10 Honda Odyssey Remote Transmitter Programming
Program only when system malfunction, key added or replaced.
- Obtain all remote transmitters
- A maximum of 3 remote transmitters can be programmed
- Switch ignition ON
- Proceed as follows. NOTE: Point remote transmitter at door function control module (located in driver’s door)
- Within 4 seconds: Press LOCK button [1] or UNLOCK button [2] of first remote trasnmitter
- WIthin 4 seconds: Switch ignition OFF
- Within 4 seconds: Switch ignition ON
- Repeat procedure above twice
- Within 4 seconds: Press LOCK button [1] or UNLOCK button [2] of first remote transmitter
- System should now lock and unlock vehicle to indicate programming mode activated
- WIthin 10 seconds. Press LOCK button [1] or UNLOCK button [2] of first remote transmitter, allowing doors to lock and unlock once. Press LOCK button [1] or UNLOCK button [2] of each remaining remote transmitter to be programmed, allowing doors to lock and unlock once as each remote transmitter is programmed
- Switch ignition OFF, remove key. And check operation of all programmed remote transmitter