This procedure only programs the remote portion of the key
and NOT the key itself

Have all remotes for the vehicle on hand.




Make sure all the doors and rear hatch/trunk are closed
during programming.

Only need to use 1 remote to get into program mode but all
remotes must be programmed during the same session.

Each step must be completed within 5 seconds.

1. Sit in the car with all doors/trunk tightly closed

2. Turn the key to the ON position, marked by “II” on the ignition bezel
so the dash lights come on, then within 5 seconds press the
“Lock” button on the remote for 1 second or so and release the
button.

3. Turn the key to the OFF position, marked by “I” on the ignition
bezel – dash lights go off.

4. Repeat steps 2 & 3 three more times (A total of 4 times)