05-07 Buick Terraza Remote Programming Instructions

A picture of an object with a blue background.
Program only when system malfunction, key added or replaced.

Immobilizer
How – master key available




  • Note: Verify that new key has PK3 stamped on it
  • Switch ignition ON and start engine
  • Switch ignition OFF and remove key
  • Within 5 seconds insert new key
  • Switch ignition ON
  • New key now programmed
  • Note: A maximum of 10 keys can be programmed using the master key

How – master key not available

  • To program a new master key proceed as follows
  • Switch ignition ON with master key to be programmed
  • STARTING DISABLED DUE TO THEFT message will be displayed on the Driver information center(DIC)
  • After approximately 10 minutes STARTING DISABLED DUE TO THEFT message will switch OFF
  • Switch ignition OFF
  • Wait 5 seconds
  • Switch ignition ON
  • STARTIN DISABLED DUE TO THEFT message will be displayed on the Driver information center (DIC)
  • After approximately 10 minutes STARTIN DISABLED DUE TO THEFT message will switch OFF
  • Switch ignition OFF
  • Wait 5 seconds
  • Switch ignition ON
  • STARTING DISABLED DUE TO THEFT message will be displayed on the Driver information cencer (DIC)
  • After approximately 10 minutes STARTING DISABLED DUE TO THEFT message will switch OFF
  • Switch ignition OFF
  • Wait 5 seconds
  • Start engine
  • New master key now programmed
  • With a scan tool, clear any digital trouble codes (DTC’s)
  • Replacement parts can also be programmed using diagnostic equipment
  • NOTE: Replacement keys have to be cut using ignition lock number, or using original as pattern