08-10 Buick Enclave Keyless Entry Programming Guide

2008 Buick Enclave Programming Guide

Use this Procedure for Vehicles with
Driver Information Center Buttons

This information is in your Owners Manual in the
Drivers Information Center Section.

  1. Insert Key and turn to ON position so you can access Driver Information Center
  2.  Press the vehicle information button until
    PRESS TO RELEARN REMOTE KEY displays
  3. Press the set/reset button until
    REMOTE KEY LEARNING ACTIVE displays
  4. Press and hold the lock and unlock buttons on the keyless remote at the same
    time for approximatley 15 seconds. A chime will sound indicating that the remote is
    programmed.
  5. To program additional remotes at this time repeat step 4.
    This vehicle can have a maximum of eight remotes programmed.
  6. To exit programming mode turn key off and remove key.
    Test remote(s).